Monday, March 11, 2013
Cross Stitched iPhone Case
My sister bought this case for me as a gift for my birthday back in November, but I just got around to spending some time on it in the last couple days. Isn't it cute? I saw a similar pattern online, and used some thread I bought from a garage sale. The case I have is no longer available on Amazon, but you can find a similar one here.
Friday, March 8, 2013
Wednesday, March 6, 2013
Andes Mint Cupcakes
Here's another sweet treat I made for my mom's birthday (along with the coffee syrups) and they were so yummy. I halved this recipe to only make about 16 cupcakes for a small celebration, but you can see the full recipe here. It looks intensive because of the long ingredients list, but it was really pretty simple. You could even use a box cake mix for the cupcakes and just make the frosting and ganache. Also don't substitute peppermint essential oil for peppermint extract like I almost did. The bottle was open, ready to be poured when I had an "aha!" (or maybe more like a "stop it stupid!") moment to make me come to my senses. Peppermint is known to be awakening, after all.
Labels:
Cooking
Monday, March 4, 2013
Make Your Own Coffee Syrups
Here's a super easy way to make your own coffee syrups. These recipes come from A Beautiful Mess, but my recipes below are halved to fit in these 7 oz World Market bottles. See below the recipes for a gift wrapping idea! This is the perfect inexpensive and easy gift.
Vanilla syrup: 1 cup water, 1 cup sugar, 1/4 teaspoon vanilla extract. Heat water and sugar in a pan over medium low heat, stirring constantly until dissolved. Stir in vanilla extract. Pour into container.
Caramel syrup: 1 cup water, 1 cup sugar, 1/4 cup caramel. Heat water and sugar in a pan over medium low heat, stirring constantly until dissolved. Stir in caramel until disolved. Pour into container.
For a raspberry syrup recipe, click here. They also have lavender and honey recipes here.
I gift wrapped the bottles in the box they came in. This is the box before decoration. Reusing this box helps so the bottles won't fall over in the gift bag and possibly leak. You can purchase the bottles for $3.99 (for both!) at World Market.
For the next part, all you need is some kraft paper, a pen, double sided tape and a bit of scrapbook paper. For the bottle labels, I just wrote the labels and designs on kraft paper, cut the circles out, and used double sided tape to stick the labels to the bottles. For the box, simply cover the printing on the front with a written label. I gave these to my mom for her birthday this weekend and she didn't know that I made them until my husband told her!
Friday, February 22, 2013
My Daily Reads
There's nothing I look forward to more on a working morning than checking my email for new posts from my favorite bloggers. The blogs listed below are my must-reads. I hope you find in them a blog you love too!
Craft Blogs
![]() |
| Petra does a lot of crocheting and sells her patterns online. Right now she's doing a 365 photo series and I like seeing what she's working on each day. Zoom Yummy |
![]() |
| The Hawthorne Threads blog complements their online fabric store. They show what's just arrived in their store and some projects they're working on. Hawthorne Threads Blog |
![]() |
| I originally started following Suzanne's blog because she does a lot of pattern making and sewing clothing. Now she just purchased a house, so there are many home DIYs on her blog. Adventures in Dressmaking |
![]() |
| This blog has cute crochet projects, inspiration, and some craft business info. I love any modern crochet blog. The New Crochet |
![]() |
| Random craftiness, including her recent office interior designing project. She's a sparse blogger (like me!) but I like reading her posts when she does write. Compulsive Craftiness |
![]() |
| Novita, who lives in Tokyo, blogs about sewing projects. Most of the posts I've seen have been for pretty undergarments. VeryPurplePerson |
![]() |
| The latest textile trends and releases, both domestic and international. She provided a really extensive review of the new lines at Quilt Market in the fall. True Up |
Food Blogs
![]() |
| Andie is literally the only blogger whose recipes my husband trusts. We regularly make her meatloaf, chicken parmesan wrap ups, favorite meatballs, and alfredo sauce. She's super great. Can You Stay for Dinner |
![]() |
| Kristen is a really fun blogger and I've found several recipes of hers that I like. Her blog is a good daily read. Iowa Girl Eats |
![]() |
| The name says it all. Yummy treats, including one I'll be making soon: Lemon Lavender Cookies. My Baking Addiction |
Lifestyle Blogs
![]() |
| Elsie and Emma have a great blog about everything: food, style, DIY, etc. The best part is they often post up to three times a day. A Beautiful Mess |
![]() |
| I love reading about Kristy and her family in New Zealand. She also has great cookie recipes. Paisley Jade |
Business Blogs
![]() |
| Everything Etsy really has something for everyone crafty, but I have this under business because I receive her business newsletter with posts about photography and selling on Etsy. Everything Etsy |
![]() |
| Seth Godin's blog has thoughts on marketing and business. I'm personally inspired by his emphasis on being creative, and I always have something to think about after reading his blog. He has some great TED talks too. Seth Godin |
Monday, February 11, 2013
DIY Little Wooden Houses
Here's a cute tutorial that's super quick if you have a compound miter saw. Ours is being loaned to us by my husband's parents while we build our coffee table, and I think I might get one since it's so handy! You can also use a jigsaw (as shown in this tutorial, which was my inspiration), but the compound miter saw will allow you to have exact angles ... just how I like them.
Supplies
1-2x2 piece of lumber
Compound miter saw or jigsaw
Fine sand paper
Paint
1. Measure to the middle and make a mark at each end of the board. Draw a faint pencil line lengthwise down the center of the board.
2. Set your compound miter saw to a 45 degree angle. Place your board pencil line side down on the saw base and cut across the board near one of the ends.
3. Flip the board over. Find where the angle you just cut meets the pencil line on your board. Line up the saw and cut so the pencil line is at the peak of the little house's roof.
4. Set your saw back to a 0 degree angle and cut off the board however tall you'd like your houses (mine are approximately 1.5", 2", and 2.5" tall).
5. Sand sharp corners and pencil marks.
6. Paint the roof.
Monday, January 28, 2013
Anthro Display Hack: Hat Stand
I'm planning on adding hats to my Etsy shop soon, and have been searching online for inspiration and advice for photography. One site somewhat obviously suggested checking out companies whose product photography you like, and I immediately thought Anthropologie. Their product photos are taken on a white background and use few models, which is what I like in my photography. Here's the hat stand I came across that I fell in love with, and is also my model for my copycat stand:
Cute, right? A simple wire hat stand. I found the original source to buy one, but it was almost $25 including shipping. Call me cheap but I'm not willing to pay that, so I made a trip to JoAnn's, picked up some wire, and made it yesterday evening. Here's what I came up with using $2 of wire:
Boom. Mine is shorter and appears larger in this photo but it works. I have to work on getting a few kinks out of the base, but overall, a success. See the quick tutorial below. I wasn't planning on this being a tutorial, so if you have any questions, please leave them in the comments.
1. Get your supplies: Tape measure, 12 gauge wire (two 3 yard rolls), wire cutters, and a bowl that measures approximately 18" around.
2. This is the wire I purchased. It was $1.99 a roll but with two 50% off coupons from JoAnn's, it was $1.99 for two rolls. You don't want any wire much thinner than this or it won't be able to support a hat.
3. Cut four-one yard long sections of wire. Measure to the halfway point (18") of each section. This will be the top of the hat stand. Mold one piece of wire around the overturned bowl until it intersects. Twist to hold in place. Measure 2" down from the circle you just created and bend the wire outward. Using the bowl again, bend the wire down until it forms a half circle. See photo. Repeat until you have four shaped wires.
4. Set your four forms inside each other and fan out until it resembles a sphere. Attach them together at the top with a small piece of wire.
5. Wrap wire around the top and bottom of the straight section to hold in place.
6. Cut a piece of wire approximately 20" and make a circle around your bowl, wrapping the wire ends around each other to hold the circle's shape. Wrap each of the end wires of your stand around the circle and trim.
7. Cut another piece of 20" wire and make another circle around your bowl, wrapping the wire ends around each other to hold in place. Connect around the middle of the sphere in four places.
That's it! I think I'm going to use these at an artisan's market this spring and fall to show off my hats! Might even make some taller and shorter to complete a display. I haven't decided yet if I want to spray paint the stand, leave as is, or do something fun like wrapping strips of fabric around and gluing. Such a fun project!
Cute, right? A simple wire hat stand. I found the original source to buy one, but it was almost $25 including shipping. Call me cheap but I'm not willing to pay that, so I made a trip to JoAnn's, picked up some wire, and made it yesterday evening. Here's what I came up with using $2 of wire:
Boom. Mine is shorter and appears larger in this photo but it works. I have to work on getting a few kinks out of the base, but overall, a success. See the quick tutorial below. I wasn't planning on this being a tutorial, so if you have any questions, please leave them in the comments.
![]() |
| Click on photo to enlarge. |
2. This is the wire I purchased. It was $1.99 a roll but with two 50% off coupons from JoAnn's, it was $1.99 for two rolls. You don't want any wire much thinner than this or it won't be able to support a hat.
3. Cut four-one yard long sections of wire. Measure to the halfway point (18") of each section. This will be the top of the hat stand. Mold one piece of wire around the overturned bowl until it intersects. Twist to hold in place. Measure 2" down from the circle you just created and bend the wire outward. Using the bowl again, bend the wire down until it forms a half circle. See photo. Repeat until you have four shaped wires.
4. Set your four forms inside each other and fan out until it resembles a sphere. Attach them together at the top with a small piece of wire.
5. Wrap wire around the top and bottom of the straight section to hold in place.
6. Cut a piece of wire approximately 20" and make a circle around your bowl, wrapping the wire ends around each other to hold the circle's shape. Wrap each of the end wires of your stand around the circle and trim.
7. Cut another piece of 20" wire and make another circle around your bowl, wrapping the wire ends around each other to hold in place. Connect around the middle of the sphere in four places.
That's it! I think I'm going to use these at an artisan's market this spring and fall to show off my hats! Might even make some taller and shorter to complete a display. I haven't decided yet if I want to spray paint the stand, leave as is, or do something fun like wrapping strips of fabric around and gluing. Such a fun project!
Subscribe to:
Posts (Atom)

.jpg)
.jpg)
.jpg)

















